Model 2024

Equip your apparatus with tomorrow's technology today!  Designed for Class A and / or Class B foam applications, the Model 2024 delivers concentrate from a microscopic .01 gpm (.04 l/m) to 6.34 gpm (24 l/m) - all with unmatched accuracy and simplicity.

At the simple push of a button, the FoamPro Model 2024 automatically manages all foam proportioning requirements.  Patented micro-processor controls ensure the precise amount of concentrate is injected into the water stream.  FoamPro's discharge side injection delivers exact amount of concentrate regardless of changes in water flow rate, pressure, elevation or nozzle types.  Unlike venturi based systems, more water and pressure is available at the nozzle as the flowmeter does not restrict water flow. 

 

Real time performance information is displayed to the operator via ultra-bright LED digital control module readouts.  The optional Automatic Feature Controller allows "Auto-On" programming, which activates the system when pump mode is engaged.
  • Other features include:
  • • Installs easily in new or existing apparatus
  • • No in-line restrictions
  • • Delivers unmatched accuracy over the widest range of flows
  • • Leading the industry in proven reliability
  • • Proportions continuously, with no stopping to refill
  • • Discharge side injection
  • • Provides the smoothest proportioning available at low flows
  • • Delivers 0.01 to 6.34 gpm (0.04 - 24.0 L/min)
  • • Achieves full pump capacity with all known Class A, Class B AFFF and most Class B AR-AFFF*
  • Control module features:
  • • Ultra-bright LED digital readout
  • • Injection percentage from 0.1% to 10.0%
  • • Displays separate totals for each foam concentrate
  • • Low concentrate warning
  • • Water flow rate
  • • Total water used
  • • Percent of foam concentrate
  • • Total concentrate used
  • • Dual foam capability and calibration
  • Options available:
  • • Dual-Tank Valves
  • • MultiFlo
  • • Remote Start/Stop for pump and roll applications
  • • Dual-Injection Selector
  • • Advanced Feature Controller
  • *Note: FoamPro systems will pump all known Class A and Class B Aqueous Film Forming Foam (AFFF) to capacity. Many brands of Alcohol Resistant-Aqueous Film Forming Foam (AR-AFFF) exhibit higher viscosity characteristics due to chemical composition and polymers. As viscosity increases, diminished flow may affect pump performance. Because of numerous variables including pump design, foam cell configuration, inlet piping/components and system layout; please contact FoamPro for application specific recommendations when foam viscosities of 2000 cps or higher are used.
    •
    Skip Navigation Links
    privacy
    terms of use
    site index
     Pentair Water, 375 5th Avenue NW, New Brighton, MN  55112, Phone (651) 766-6300, Fax (651) 766-6600