AccuMax Single-Point Injection

The AccuMax Single-Point Injection series is available in six models with the main difference being capacity. All are hydraulically-driven and incorporate an Edwards rotary gear pump. System components include a microprocessor control/display unit, instruction placard, hydraulic control block, pump and motor assembly, load-sensing hydraulic pump, filters, strainer, foam injection check valve, complete shielded cable set and RFI/EMI suppression kit.
Main Waterway Check Valve
Prevents back flow to the fire pump. Electroless nickel plated with S.S. components or all stainless steel construction, rated for 450 psi with NPT thread size of 1-1/2", 2", 2-1/2", 3" and 4". Includes tapped injection and drain ports.
System Rating Placards
Attractive placard designed for the operator’s panel, listing system ratings.
Advanced Digital Feature Controller
Provides programmable choice of activation of proportioning manually by push of ON button or automatically ON with engagement of fire pump. Ideal for CAFS and SOP’s directing foam use.
Flowmeter and Tee
Paddlewheel flowmeter reads fire pump discharge flow without restricting performance. Thread sizes (NPT & BSP) available in 1-1/2", 2", 2-1/2", 3" and 4". Also machined for Victaulic coupling. Magnetic flowmeters available for larger piping arrangements.
System Schematic Placards (Single or Dual-Tank)
Attractive placard designed for the operator’s panel, depicting single or dual-tank systems.
Low-Level Tank Sensor
Provides signal to display, notifying operator of low concentrate condition in foam cell. Available in top/bottom or side mount.
MultiFlo Interface
Provides calibration and flow totals for up to four different discharges.
Remote Start/Stop
Separately-mounted switch interfaces with digital control head allowing remote activation of the proportioner. Designed for in-cab pump and roll operations.
Concentrate Cell
Polypropylene concentrate tanks with one-way vented cap available in 8, 12 or 20-gallon capacities.
Solid State Contactor
Engineered specifically for high current draw applications such as proportioner pumps, FoamPro’s solid state DC contactor offers many advantages over mechanical solenoid contactors.
Stainless Steel Foam Manifold
The foam manifold incorporates the flowmeter sensor, main waterway check valve, concentrate injection port anddrain port all into one compact assembly.
Skip Navigation Links
privacy
terms of use
site index
 Pentair Water, 375 5th Avenue NW, New Brighton, MN  55112, Phone (651) 766-6300, Fax (651) 766-6600