Stainless Steel Foam Manifold
The foam manifold incorporates the flowmeter sensor, main waterway check valve, concentrate injection port anddrain port all into one compact assembly.
Solid State Contactor
Engineered specifically for high current draw applications such as proportioner pumps, FoamPro’s solid state DC contactor offers many advantages over mechanical solenoid contactors.
Allows choice of two different concentrate injection points. Ideal for high/low pressure fire pumps or high-flow (aerial/deluge), low-flow applications.
Electronic Concentrate Management System
Electronically-operated valve allows choice between two different concentrates. Flush mode prevents mixing, and interface with control head provides calibration and storage of performance results of each concentrate.
Manual Concentrate Management System
Manually-operated valve allows choice between two different concentrates. Flush mode prevents mixing, and interface with control head provides calibration and storage of performance results of each concentrate.
Separately-mounted switch interfaces with digital control head allowing remote activation of the proportioner. Designed for in-cab pump and roll operations.
Provides calibration and flow totals for up to four different discharges.
Advanced Digital Feature Controller
Provides programmable choice of activation of proportioning manually by push of ON button or automatically ON with engagement of fire pump. Ideal for CAFS and SOP’s directing foam use.
System Schematic Placards (Single or Dual-Tank)
Attractive placard designed for the operator’s panel, depicting single or dual-tank systems.
System Rating Placards
Attractive placard designed for the operator’s panel, listing system ratings.
Flowmeter and Tee
Paddlewheel flowmeter reads fire pump discharge flow without restricting performance. Thread sizes (NPT & BSP) available in 1-1/2", 2", 2-1/2", 3" and 4". Also machined for Victaulic coupling. Magnetic flowmeters available for larger piping arrangements.
Main Waterway Check Valve
Prevents back flow to the fire pump. Electroless nickel plated with S.S. components or all stainless steel construction, rated for 450 psi with NPT thread size of 1-1/2", 2", 2-1/2", 3" and 4". Includes tapped injection and drain ports.
Low-Level Tank Sensor
Provides signal to display, notifying operator of low concentrate condition in foam cell. Available in top/bottom or side mount.
Polypropylene concentrate tanks with one-way vented cap available in 8, 12 or 20-gallon capacities.
AccuMax Individual Line Controller
For each controllable discharge, maximum of eight. Sized 3/4”, 1”, 1-1/4” and 1-1/2” to flow from 6 to 150 gpm of concentrate. Includes foam controls, driver, cable and LED digital display head.