2000 Series

The 2000 series is available in two models, differing only in capacity. Each system includes a Hypro triplex plunger pump and DC (12 or 24 volt) motor assembly. Also included are a microprocessor control/display unit, instruction placard, strainer, foam injection check valve, complete shielded cable set and RFI/EMI suppression kit. The system provides fully automatic foam proportioning, regardless of changes in flow or pressure, and offers convenient, push-button operation, making it the easiest system to use. LED digital readouts provide real time performance information.  The optional advanced feature controller offers “auto-on” programming which automatically arms the proportioner when the fire pump is engaged.
Main Waterway Check Valve
Prevents back flow to the fire pump. Electroless nickel plated with S.S. components or all stainless steel construction, rated for 450 psi with NPT thread size of 1-1/2", 2", 2-1/2", 3" and 4". Includes tapped injection and drain ports.
System Rating Placards
Attractive placard designed for the operator’s panel, listing system ratings.
Advanced Digital Feature Controller
Provides programmable choice of activation of proportioning manually by push of ON button or automatically ON with engagement of fire pump. Ideal for CAFS and SOP’s directing foam use.
Flowmeter and Tee
Paddlewheel flowmeter reads fire pump discharge flow without restricting performance. Thread sizes (NPT & BSP) available in 1-1/2", 2", 2-1/2", 3" and 4". Also machined for Victaulic coupling. Magnetic flowmeters available for larger piping arrangements.
Dual-Injection Selector
Allows choice of two different concentrate injection points. Ideal for high/low pressure fire pumps or high-flow (aerial/deluge), low-flow applications.
System Schematic Placards (Single or Dual-Tank)
Attractive placard designed for the operator’s panel, depicting single or dual-tank systems.
Low-Level Tank Sensor
Provides signal to display, notifying operator of low concentrate condition in foam cell. Available in top/bottom or side mount.
MultiFlo Interface
Provides calibration and flow totals for up to four different discharges.
Remote Start/Stop
Separately-mounted switch interfaces with digital control head allowing remote activation of the proportioner. Designed for in-cab pump and roll operations.
Electronic Concentrate Management System
Electronically-operated valve allows choice between two different concentrates. Flush mode prevents mixing, and interface with control head provides calibration and storage of performance results of each concentrate.
Manual Concentrate Management System
Manually-operated valve allows choice between two different concentrates. Flush mode prevents mixing, and interface with control head provides calibration and storage of performance results of each concentrate.
Concentrate Cell
Polypropylene concentrate tanks with one-way vented cap available in 8, 12 or 20-gallon capacities.
Solid State Contactor
Engineered specifically for high current draw applications such as proportioner pumps, FoamPro’s solid state DC contactor offers many advantages over mechanical solenoid contactors.
Stainless Steel Foam Manifold
The foam manifold incorporates the flowmeter sensor, main waterway check valve, concentrate injection port anddrain port all into one compact assembly.
Skip Navigation Links
privacy
terms of use
site index
 Pentair Water, 375 5th Avenue NW, New Brighton, MN  55112, Phone (651) 766-6300, Fax (651) 766-6600